IMPORTANT WHEEL FITMENT NOTES
All Mickey Thompson Classic Series, SideBiter®, and M/T Metal Series wheels require (60-Degree) Bulge Acorn (Cone Bulge) Seat Lug Nuts. Mickey Thompson recommends Duplex Bulge Acorn Lug Nuts on vehicles of GVWR of 6,500 lbs. or greater.

All Deegan 38 Series wheels use 60 Degree Conical Bulge Seat lugs but will also accept E/T Style lug nuts which provide a lug-centric installation.

Not suitable for use on 2022 to present Toyota Tundra models due to insufficient fastener thread engagement

For All 6x5.5 Bolt Circle Wheels: Hub Centering Ring included for late Model Chevrolet/GMC applications.

Center caps are not available for certain applications including 1997 & earlier Ford 3/4 & 1-ton pickups, 2002 & earlier Dodge/Ram 3/4 & 1-ton pickups, 1986 & earlier Jeep, CJ models & earlier Toyota Land Cruiser models.

Open caps are available for 5, 6 and 8 lug Classic Series wheels, separately.

NOTE: All dual drill wheels in the MT METAL line are cover-style caps—no exposed lugs.

MICKEY THOMPSON WHEELS LIMITED LIFETIME WARRANTY
Mickey Thompson Performance Tires warrants to the original purchaser that a new M/T Wheel is free from defects in material and workmanship and agrees to replace a M/T Wheel which fails in normal use and service resulting from defects in material and workmanship for the life of the vehicle for which said wheel was intended and purchased for. Mickey Thompson Performance Tires does not warrant any wheel which has been subject to misuse or abuse including the following;

Using tires which are oversized according to the standards recommended by the Tire and Rim Association, Inc.; Loading the wheel beyond the applicable maximum wheel load as specified by Mickey Thompson Performance Tires; Any type of racing or activity which subjects wheels to the abuse of racing, whether on the road or off; Inflating beyond the maximum specified on any given tire size as specified by Mickey Thompson Performance Tires;

Changing or altering the original condition of the wheel or by subjecting it to any processing such as welding or straightening.

WHEEL FINISH WARRANTY
Classic III Black, Sidebiter II, Classic Baja Lock, MT Classic Pro, MT Canyon Pro, MT Canyon, MT Open 5, DC Torque, DC-2 Black — 1 Year Finish Warranty

THERE IS NO WARRANTY THAT WHEELS ARE MERCHANTABLE OR SATISFACTORY FOR ANY PARTICULAR PURPOSE NOR IS THERE ANY OTHER WARRANTY EXPRESSED OR IMPLIED EXCEPT AS SET FORTH HEREIN.

Mickey Thompson Performance Tires shall not be liable for any incidental consequential damages for any breach of warranty, its liability and the purchaser’s exclusive remedy being expressly limited to replacement of defective wheel, as herein provided. Replacement will be handled by an authorized Mickey Thompson Performance Tire Dealer or Mickey Thompson Performance Tire representative.``